Mobile/Whats app/Wechat: +86 136 1862 9837
New Products
New Products
AC Resonant Test System
AC Resonant System
AC/DC/VLF Hipot Test Set
DC Hipot Test Set
AC/DC Hipot Test Set
VLF Hipot Test Set
Induced Withstand Voltage Test Set
Insulating Boots(Gloves) Test Set
AC&DC Digital HV Meter
Primary Current Injection Test Set
Transformer Tester
Frequency Response Analyzer
Transformer Test Bench
Partial Discharge Test System
Winding Resistance Tester
Transformer Capacity Load Tester
TTR Meter
Tan-delta Tester
Transformer Oil Tester
Transformer Tap-changer Tester
Circuit Breaker/Switch Tester
Contact Resistance Tester
Circuit Breaker Analyzer
Relay Tester
Relay Tester
CT PT Analyzer
CT PT Analyzer
Cable/ Line Tester
Cable/ Line Tester
SF6 Test Equipment
SF6 Test Equipment
Insulation Resistance Tester
Pointer Insulation Resistance Tester
Digital Megohmmeter
Adjustable Megohmmeter
Power Quality Analyzer
Power Quality Analyzer
Earth Resistance Tester
Earth Resistance Tester
MOA/Insulator Tester
MOA/Insulator Tester
Insulator Test Instrument
Battery Tester
Battery Tester
Power Compensation Test Set
Capacitance Bridge Tester
Capacitance Inductance Tester
Hot keywords: Relay Tester Cable Fault Detector CT PT Tester SF6 Tester Transformer Tester
Send Inquiry
Fill this form and we'll get back to you soon.
RELATED PRODUCTS
WXZGS Generator DC Hipot Test Set
Power:AC220V±10% 50HZ Output voltage accuracy :±(1.0%R±2D) Output current accuracy : ±(1.0%R±2D) Ripple factor :≤0.5% Working mode :Intermittent use, 30 minutes under rated load
WXZG-60kV/5mA DC HV Hipot Tester
Power :AC220V±10%,50Hz±1% Output voltage indication accuracy :<1 class 0.75 times output voltage indication accuracy :<1 class,With latch Altitude :1500m below Way of working :Intermittent use for 30 minutes
WXTF Variable Frequency Cable Resonant Test Set
Power supply:Single phase :220V Or three phase :380V±10%, Frequency:50Hz±5% AC effective value Rated output voltage：≤0~220kV Output frequency ：30~300Hz Frequency adjustment ：0.1Hz
WXRS AC Resonant Test System For Substation
Frequency Power Source: 3kv~60kv Divider: 50kv~800kv Rated Output Voltage:0~1000kv Power Supply: single phase220V / 3 phase 380V
WXZG High Voltage DC Generator
Power:AC220V±10%, 50Hz±1% Ripple factor : ≤0.5% 0.75 times output voltage indication accuracy : <1，with latch function Working mode :discontinuously work for 30 minutes Altitude :<1500m
WX9320 AC DC Withstanding Voltage Tester / Insulation Resistance Tester
Withstanding Voltage Test Output Voltage: AC: 0.05~5.00KV DC: 0.05~6.00KV Current Test Range: AC: 0.00~10.00mA DC: 0.00~5.00mA
WX9320-S8A AC DC Hipot Tester / Insulation Resistance Tester
Withstanding Voltage Test Output Voltage: AC: 0.05~5.00KV DC: 0.05~6.00KV Current Test Range: AC: 0.00~10.00mA DC: 0.00~5.00mA
WX2672CM Portable AC/DC Dual Use Hipot Tester
Power Requirements: AC:220V±10% 50Hz/60Hz ± 3Hz Test Accuracy: ± (5%+3 words) Test Time: (0.0~999)s 0.0=continuous test Transformer Capacity: 100VA, 500VA, 1000VA. Interface of PLC: Optional
WXSY-I Portable Withstand Voltage Tester
Capacity: 0.5KVA Alarm current(mA):0.5～20 Test time: 1～99s Power supply: 220V±10%, 50Hz Humidity: ≤80%
XC/TC Power AC Hipot Tester
Monitoring function: output current, meter voltage, timing. Capacity :2/3/5/10/15... Phase :1/2 Operation :Manual/Electric Altitude :< 2000m
WXYD-Z Automatic Power Frequency Withstand Voltage Test
Power Supply: AC220V ±15%, 50Hz±2Hz Measuring accuracy: 0.5%±2d Measuring range: 0～9999 Display: LCD Display
YDQ Gas Type AC Dielectric Test Set Transformer
Transformer Type: Gas Type Voltage Class: 10KV-300KV Capacity range: 1-500KVA Product Type: AC/DC No-load current: <7% Impedance voltage:≤8%
GTB Dry Type AC DC Hipot Test Set
Type: Gry Type Impedance voltage: ≤12% Output voltage waveform: sine wave Capacity: 1.5~30KVA Input Voltage: 200 or 400V Output Voltage: 50~120KV
YDJ DC/AC High Voltage Test Transformer Oil Immersed
Type:Oil Immersed Capacity:1.5~300KVA High Voltage: 50~300KV High Current: 30~3000mA
WXYD-ZC Automatic AC DC Withstanding Voltage Tester
Power voltage: AC 220V Capacity: 0-5KVA Output voltage: 0-250V Voltage accuracy: ±0.5 Current accuracy: ±0.5
WXYD Withstand Voltage Tester Set
Temperature: 0~4℃ Relative temperature: <85% Altitude: <1000m Workplace should be free of gases etc
WXIP-D Insulation Pad Insulation Separator Test Electrode
Use: non-fixed placement, Altitude: not less than 2000m Highest temperature:+40 ° C Lowest temperature -25 ° C Earthquake intensity 8 degrees
WXVLF VLF AC Hipot Test Set
Rated Voltage: 30KV-80KV. Output frequency: 0.1Hz、0.05Hz、0.02Hz Power: AC 50 Hz，220V ±5% Fuse: 5A-20A Measurement accuracy:2.5% Voltage wave form distortion: ≤3%
WXVLF Touch Screen VLF AC Hipot Test Set
Large test range: 0.1Hz, 0.05Hz and 0.02hz Multi frequency selection, large test range Comprehensive protection: multiple protection over-voltage protection, over- current protection at high and low voltage sides), rapid action (when acting)
WXSBP Triple Frequency Induced Withstand Voltage Hipot Tester
Input current: 7.6A Output voltage: 0-300V, 150Hz Harmonic distortion ≤5% Output current: 5A Output capacity: 5KVA
WXJY-Z 5kVA/50kV Automatic Insulating Boots/Gloves Withstand Voltage Test
Power voltage :AC 220V Capacity:5KVA Output voltage :0—250V High Voltage output: 0-50KV Operation mode: Auto, manual
WXJY-Z 3kVA/30kV Automatic Insulating Boots/Gloves Voltage Test Equipment
Power voltage :AC 220V Capacity :3KVA Output voltage :0—250V Voltage accuracy/Current accuracy :±1.0 Operation mode :Auto,manual Output voltage :0—250V
WXJY-S Manual Insulating Boots/Gloves Voltage Test Set
Input Voltage: AC220V, 50Hz Output Voltage: 0~30KV Capacity: 3KVA Numbers: 3 pairs each test Glove/boot test bed: 80kg Frequency voltage withstand test bed: 70kg
WXJY-Z Automatic Insulating Boots(Gloves) HV Testing Equipment
Input Voltage: AC220V, 50Hz Output Voltage: 0~30KV Capacity: 3KVA Test quantity: 6 each time User interface: LCD, with printer
FRC AC/DC High Voltage Digital Divider
Ratio: 1000:1 Insulating medium: dry type dielectric material AC Measuring method: real effective value measurement Voltmeter range: Low: 0-20kv; High:0-50kv Accuracy: AC:1.0% ; DC:0.5%
WXSL Primary Current Injection Test Set
Capacity: 3-60KVA Auto transformer adjusts freely
WXRB-V Sweep Frequency Response Analyzer
Amplitude measurement range :(-100dB)～(+20dB) Amplitude measurement accuracy :0.1dB Scan frequency accuracy :<0.01% Signal input impedance :1MΩ Signal output impedance : 50Ω
WXBT-Z Transformer Test Bench
Power supply :AC220V±10%; 50HZ±2% Power factor :0.1～0.9999 Voltage ：0.1～600V Current :0.1～200A Relative error :±(0.2% reading +0.1% measurement range)
WXJF-S Partial Discharge Analysis Testing Equipment
Display: 4.0inch RGB LCD screen Headphone: 8ohm minimum Controller: ARM Sensor transmission impedance: 5mV/mA TEV Measurement range: 0-60dBmV UHF Detection frequency band: 300~1500MHz
WXJF-301 Partial Discharge Test System
Partial discharge peak display: 0～10000pC Measurement channels: Channels A and B Detection sensitivity: 0.1pC Measuring frequency band: 3dB band width 10kHz～300kHz Gain dynamic range: 120dB
WXZRC-10H Winding Resistance Tester
Output current: 1A, 5A, 10A Measuring range: 500uΩ~50kΩ Accuracy: ±(Reading X 0.2%)+2 words) Maximum resolution: 0.1uΩ Charging current: ≤3A Charging voltage: 16.8V
WX-20AT Transformer DC Resistance Tester
Output current: select current automatically (maximum 20 A) Range ability: 0-100 Ω Accuracy: 0.2%±2 Minimum resolution: 0.1 μΩ Altitude: ≤1000meters
WXZR-S20A Winding Resistance Test Set
Power :AC 220V±22V，50Hz±2 Hz Data storage capacity :150 groups Measurement :Single phase (two phase) /Three phase Current gear :1A 5A 10A 20A 40A Max resolution :0.1μΩ Accuracy :±0.2%+2d (full range)
WXZR-S10A Transformer DC Resistance Test
Power :AC 220V±22V，50Hz±2 Hz Data storage capacity :150 groups Accuracy :±0.2%+2d (full range) Max resolution :0.1μΩ Measurement :Single phase (two phase) /Three phase
WXZR-1A DC Transformer Winding Resistance Tester
Working voltage :DC 11V～14V AC 220V Constant current source :1A(1μΩ～20mΩ、20mΩ～200mΩ、0.2Ω～2Ω) 100mA(2Ω～20Ω) 10mA(20Ω～200Ω) 1mA(200Ω～2kΩ) Max resolution :1μΩ Measuring accuracy :Class 0.2
WXZR-2A DC Transformer Winding Resistance Tester
Working voltage :DC 11V～14V ;AC 220V Power Dissipation :≤15W Resolution :1μΩ Measuring accuracy :Class 0.2 Wide measurement range :resistance measurement range 1μΩ ~ 2KΩ, wide range
WXZR-3A DC Resistance Meter
Working voltage :DC 12V～16.8V AC 220V Measuring accuracy :±(0.2%+2d) Resolution :1μΩ Constant current source :3A(1μΩ～20mΩ、20mΩ～200mΩ、0.2Ω～2Ω) Power Dissipation :≤15W
WXZR-10A DC Transformer Resistance Test Set
Power supply :AC220V±22V，50Hz±2Hz Fuse 5A Maximum Power Dissipation :300W Max resolution :0.1μΩ Display mode :LCD display Accuracy :±0.2%（full range±2 digit） Measurement current :1mA，10mA，1A，5A，10A
WXZR-20A DC Resistance Transformer Winding Ohmmeter Tester
Measure current :1A, 5A, 10A, 20A Accuracy :±0.2%(full range) Data Storage :255 Maximum resolution :0.1μΩ Power supply :AC 220V±22V,50Hz±2 Hz Fuse 5A Maximum Power Dissipation :300W Test current:10A
WXZR-40A Transformer DC Resistance Tester
Power supply :AC 220V±22V,50Hz±2 Hz Fuse 5A Maximum Power Dissipation :1200W Inputting10A test current Maximum resolution :0.1μΩ Display :LCD Resistance display: 4 1/2 bits Accuracy :±0.2%(full range) Measure current :2.5A, 5A, 10A, 20A, 40A
WXZRC-5A Transformer Winding DC Resistance Micro-ohm Meter
Output current:<5mA ,1A,2.5A,5A Resolution:0.1μΩ Range:100Ω-20KΩ (<5mA) 1Ω-250Ω (40mA) 100mΩ-50Ω (200mA) 5mΩ-10Ω (1A) 1mΩ-2Ω (5A) Accuracy:±(0.2%+2 Readings)
WXZRC-10A/20A Transformer Winding Resistance Test Set
Output current:<5mA ,1A,2.5A,5A ,10A,20A Resolution:0.1μΩ Range: 100μΩ~1Ω (20A) 500μΩ~2Ω (10A) 1mΩ~4Ω (5A) 2mΩ~8Ω (2.5A) 5mΩ~20Ω (1A) 10Ω~20KΩ (<5mA) Accuracy:±(0.2%+2 Readings)
WXZRC-40A Transformer Winding Resistance Meter
Output current:<5mA ,2.5A,5A ,10A,20A,40A, Resolution:0.1μΩ Range:50μΩ~500mΩ (40A) 100μΩ~1Ω (20A) 500μΩ~2Ω (10A) 1mΩ~4Ω (5A) 2mΩ~8Ω (2.5A) 10Ω~20KΩ (<5mA) Accuracy:±(0.2%+2 Readings)
WXZR-100A Transformer Winding Resistance Tester
Power supply :AC 220V±22V,50Hz±2 Hz ,Fuse 5A Measure current :2.5A, 5A, 10A, 20A, 50A Accuracy :±0.2%(full range) Data Storage :255 Display :LCD Resistance display: 4 1/2 bits Maximum resolution :0.1μΩ Maximum Power Dissipation :1500W Inputting10A test current
WXZR-50A Transformer DC Resistance Winding Tester
Power supply :AC 220V±22V,50Hz±2 Hz ,Fuse 5A Measure current :2.5A, 5A, 10A, 20A, 50A Accuracy :±0.2%(full range) Data Storage :255 Display :LCD Resistance display: 4 1/2 bits Maximum resolution :0.1μΩ Maximum Power Dissipation :1500W Inputting10A test current
WXBR-V Transformer Capacity Load Tester
Temperature: －5°C～40°C Humidity: <95%（25°C） Altitude: <2500m Power supply: 220VAC±10%，45Hz~55Hz. Current output: 0 ~ 10A Voltage measurement: 0 ~ 10V
WXB-H Handheld Transformer Turn Ratio Tester
Ratio Measuremen Range :±0.1% + 2 words (0.9 ~ 500) Accuracy3 :± 0.5% + 2 word (2001 ~ 10000) Usage:Transformer Turns Ratio Tester Lithium battery power supply or 220V AC power supply is self-adapting Function:the minimum 0.0001
WXB-VI Transformer Turns Ratio Tester
TTR Measurement Range: 0.8~10000. Three phase test can be completed within 60 seconds. Voltage measurement accuracy on HV side: 0.05% Voltage measurement accuracy on LV side: 0.1% Phase angle measurement accuracy: 0.1°
WXB-II Transformer Turns Ratio Tester
Power supply: 220V±10%, AC 50 Hz. Measurement ratio: 1:10000 Connecting way：Y/d;D/y;Y/y;D/d；single phrase Display: LCD Accuracy: 1-999.9 ±0.1% class 1000-9999.9 ±0.5% class
WXB-III Automatic Three-phase Transformer Turns Ratio Tester
Rating: 0.9～2000 Accuracy:±0.1%(below500) 0.2%(501-2000) Resolution: Minimum is 0.0001 Working power supply: AC 220V±10% 50Hz Applied temperature: -10℃～40℃ Relative humidity: ≤85%, non-condensing
WXB-IV Transformer Turn Ratio Tester
Rating: 0.9～2000 Accuracy:±0.1%(below500) 0.2%(501-2000) Resolution: Minimum is 0.0001 Working power supply: AC 220V±10% 50Hz Applied temperature: -10℃～40℃ Relative humidity: ≤85%, non-condensing
WXB-V Multifunction Transformer Turn Ratio Test Set
Test range wide: 0.9-6000 Minimum Resolution: 0.0001 Rating: 0.9～10000 Accuracy:±0.1%(below500) 0.2%(501-2000) 0.5%(2001-10000) Resolution: Minimum is 0.0001 Power supply: AC 220V±10% 50Hz
WX8000 Transformer Dielectric Loss Test Tan Delta Tester
Input power supply :220V AC, 50Hz±1%, supplied by alternating current or generator Printer :WH-A7 mini-type thermal printer Accuracy :Cx:±（reading×1%+1pF） tgδ: ±（reading×1%+0.00040） Computer interface :Standard RS232 interface Test current range :Maximum output current: 200mA
WX7000 Capacitance Dissipation Factor Meter
Current output:≤200mA Power supply: AC 220V ±10%，50Hz or generator power HV output: 0.5～10kV,45Hzand 55Hz LV Output voltage: 3～50V LV Output current: 3～30A
WX9000 Capacitance Dielectric Loss Factor Tan Delta Tester
Test Current Range: 10μA～1A Relative Humidity: <90% Voltage range: 0.5～10kV Max output current: 200mA Frequency Accuracy: ±0.01Hz
WXIIJ-80D New Transformer Oil Dielectric Strength Tester
Output voltage:0～80KV (optional) Voltagedistortion rate:＜3% Booster capacity:1.5KVA Measuring accuracy:±3％ Supply voltage:AC220V±10% 50Hz±1 Hz Power:200W
WXIIJ-80KV Transformer Oil Breakdown Tester
Input voltage :AC 220V Output voltage :AC 0～80kV Voltage boosting speed :2kV/s±10% Accuracy degree :3 Number of times of continuous test :1～9 Data storage :Can store 100 groups data
WXIIJ-100KV Transformer Oil Breakdown Voltage Tester
Step-up transformer capacity 1.5 kVA Output voltage 0～100 kV Environment temperature 0～40℃ Relative humidity ≤85% Supply frequency 50 ± 5 Hz Power consumption ＜200 W
WXIIJ-80S Three Cups Automatic Transformer Oil Dielectric Tester
Input voltage: AC 220V±10% Output voltage: AC 0～80KV Voltage boosting speed: 2KV/s±10% Accuracy degree: 3 Humidity: ≤80%RH
WXIIJ-80A Single Cup Transformer Oil Dielectric Strength Tester
Power supply: AC220V ±10%、50HZ ±5% Measurement rang: AC 0KV～80KV Voltage regulating speed: 2.5KV/S±10% Clearance of cup: 2.5mm (diameter of cup proof stick) Finite current: 5mA
WXSF108 Electrolytic Oil Moisture Analyzer
Amount of electrolysis water: 10ug～1000ug Accuracy: ±2ug; >1000ug ，0.2% Measuring range: 0ug～100mg Resolution：0.1ug Maximum electrolysis speed: 40ug/s Power supply: AC220V±20%
WXBS408 Automatic Pensky Martens Closed Cup Flash Point Tester
Power: <500W Supply voltage: AC220V±10% Relative humidity: <85% Accuracy: 0.5% Resolution: 0.1℃
WXBS408A Automatic Closed Cup Transformer Oil Flash Point Tester
Power Supply: AC220V ± 20% ; 50HZ ± 10% Repeatability: 0.025X Resolution: 0.1°C Precision: 0.5% Relative Humidity: ≤ 85% RH
WXKS508 Automatic Cleveland Open Cup Flash Point Tester for Oil Testing
Supply voltage: AC220V±10% Power: <500W Relative humidity: <85% Accuracy: 0.5% Resolution: 0.1℃
WX6100 Insulating Oil Dielectric Loss Transformer Tester
Power: AC220V±10% AC HV output: 400V～2200V ±2% interval 100V 50VA DC HV output: 200V～600V ±2% interval 50V Distance between HV andLV: 2mm Liquid capacity: About 40ml
WXOPD Insulating Oil Regeneration Purifier Tester
Vacuum Degree: －0.08～－0.099 Mpa Working Pressure: ≤0.5 Mpa Temperature Range: 20～80℃ Power Supply: 380V 50Hz 3Ph(as per user,s option) Continuous Working: ≥168H
WXYSP-H Automatic Transformer Oil Dissolved Gas Chromatograph Analyzer
Temperature control area: 6 loops Program rise rate: 0.1～40℃/min Start sampling: Manual, auto Number of detectors: 5: FID, TCD, ECD, FPD, NPD (optional) Communication: IEEE802.3
WXKC-3000 Transformer On-load Tap-changer Test
Voltage output: >20V Power supply: AC220V±10%，50Hz Current output: ≥1A Power: 180W Humidity: ≤80%RH
WXHL-100HS Contact Resistance Tester
Environment Temperature: -10℃~50℃ Measuring Range: 0~20mΩ Resolution Ratio: 0.1µΩ Output Current: 100A,80A,50A,30A Test Line: Resistance less than 10mΩ
WXHL-100A Contact Resistance Test Set
Power supply :AC220V±10% 50Hz Measurement range :0～1999 μΩ Resolution :1μΩ Measured current :DC 100A Accuracy :0.5%±1d Display mode :Current: 3-1/2 LCD Resistance: 3-1/2 LCD
WXHL-200A Contact Resistance Test Set
Power supply :AC220V±10% 50Hz Measurement range :0～2999.9μΩ Measured current :DC 50A, 100A, 150A, 200A fixed output Accuracy :±(0.5% rd+2d) Continuous working time :5s～599s
WXH-100A Contact Resistance Tester
Power supply :AC220V±10% 50Hz Measurement range :0～2999.9μΩ Measured current :DC 50A, 100Afixed output Accuracy :±(0.5% rd+2d) Continuous working time :5s～599s Power of the whole machine :600W
WXH-200A Loop Contact Resistance Tester
Power supply :AC220V±10% 50Hz Measurement range :0～1999 μΩ Resolution :1μΩ Measured current :DC 50A,100A, 150A, 200A fixed output Accuracy :0.5%±1d
WXKC-12A Circuit Breaker Analyzer
External trigger test range: 0.01ms ~ 200000ms Voltage output: DC20 ～ 270V(adjustable) Current output time: 0.01~10 s (settable) Operating environment: -20℃~+50℃ Relative humidity: ≤ 9 0%
WXKC-8B Hv Circuit Breaker Analyser
Input power :220V±10% 50Hz±10% Insulation resistance :＞2MΩ Output power :DC30～250V digitally adjustable /20A (Instantaneous work） Dielectric strength: Power to chassis frequency voltage withstands 1.5KV, 1 min, no flashover and arcing. Current : Range 20.00A, resolution 0.01A
WXKC-8A Circuit Breaker Test Set
Output power :DC30～250V digitally adjustable/20A (Instantaneous work） Current :Range: 20.00A, resolution: 0.01A Insulation resistance :＞2MΩ Atmospheric pressure :86～106kpa ℃ Time :Range: 4000.0ms, resolution: 0.1ms
WXKC-8C Circuit Breaker Tester
Input power :220V±10% ,50Hz±10% Atmospheric pressure :86～106kP Internal power :220V/10A Current :20A ,Resolution: 0.01A Time :4000.0ms ,Resolution: 0.1ms
WXZK-IV Vacuum Circuit Breaker Analyser
Power supply :AC220V+15%，50Hz Measurement range :10-4～10-1 Pa Electric field voltage ：20KV Magnetic field voltage ：1600V Accuracy ：5%
WXGK-II HV/LV Switchgear Test Equipment
Input power ：three-phase four-wire AC380V Output voltage and current ：DC operating voltage output DC 0-260V Three-phase :AC100V output (fixed value) AC voltage output :AC 0～400V, 220V,current﹤10A Single-phase :AC220V output (fixed value, socket)
WXKC-II HV Switch Power Circuit Breakers Tester
Power : 220V±10% Voltage :DC15V～220V Current :0～10A Designed for :inspect and repair high-voltage circuit breakers
WXJB-D Single Phase Relay Test Kit
Relative humidity: must less than 80% Resistance: 0.5 ohm to 2.5k ohm Voltmeter Accuracy: 0.5% Ammeter Range: internal: 0.000~150.0A Ammeter Accuracy: 0.5% Stopwatch Resolution: 0.1mS
WXJB-902 Microcomputer 3 Phase Relay Protection Tester
Output accuracy :0.5 magnitude Phase current output (effective value) :0～40A Frequency range (base wave) :20～1000Hz Output accuracy :0.5magnitude Maximum output of load voltage :20V
WXJB-702 Secondary Injection Relay Test Set
Frequency range ( fundamental wave): 20～1000Hz Accuracy: 0.5 Switching value input: 8 loops Switching value output: 4 pairs Time measurement: 0.1ms～9999s
WXJB-1100 Three Phase Relay Test Set
Power source: AC 220V±10%, 50/60Hz Phase: 0--360 ° Accuracy: 0.1 ° Frequency range: 0--1000Hz Accuracy: 0.001Hz Harmonic times: 2--20 times
WXJB-1600 Six Phase Relay Protection Tester
Power voltage: AC220V±10% or AC110V±10%, 50/60Hz±10% Time measurement: 0.1ms-999999.999s Output frequency: 0-1050Hz Superposed harmonic wave: 0-21times
WXJB-II Single Phase Relay Protection Tester
Power supply: AC220V±10% 50Hz Work Environment: Temperature：-10℃～40℃ Humidity: ≤85% AC Output voltage: 0～220V/3A Digital millisecond meter: 0～99.9999s
WXCT-1000P CT PT Analyzer
Power supply :AC220V±10%,50Hz Output :0～180Vrms,12Arms,36A（peak value） Voltage measurement accuracy :±0.1% CT Ratio Range :1～40000 Burden accuracy :0.2%±2mΩ
WXCT-1001P CT PT Test Set
Input supply voltage :AC220V±10%，50Hz Test use :CT, electromagnetic PT Output :0~180Vrms，12Arms，36A(peak) Voltage measurement accuracy :±0.1%
WXFA-D CT PT Tester
Power supply :AC380V AC220V 5% or 10% error curve :Accuracy ≤1.0% CT ratio test :Range 5～25000A/5A(5000A/1A) PT ratio polarity test :Range 1～10000 Primary current injecting :Current injecting time 5 min
WXHG-F CT/PT Comprehensive Transformer Tester
Power supply :AC 220V±10% or AC 110V±10% Excitation voltage output :0-2500Vrms Excitation current output :0-5Arms (20A peak-value) Accuracy :≤0.5% (0.2%RD+0.3%RG) Accuracy:≤0.5% (0.2%RD+0.3%RG)±0.1VA
WXPT-H CT/PT Calibrator Tester
Power Voltage/Frequency :220V±5V/50Hz±0.5Hz Altitude：<2500m In-phase component (%)：0.0001～200.0 ,Resolution：0.0001 Working Load Current :TO对TX＜0.12Ω cosΦ=1 In-phase Component :ΔX=±(X×2%+Y×2%)±Dx (with Class 1 to spare)
WXHG-T12 Automatic Transformer Calibration Equipment
Power supply ：AC220V±10%，50Hz±10% Output capacity of voltage control section ：7KVA(250V 30A) can be extended as requirement Reaching Standard :Class 2 Fineness of voltage regulator :Better than 0.04V Can auto :measure the transformer,switch the current, voltage load box
WX-A30 Cable Fault Distance Locator
Working mode: LV pulse, pluse current, multiple pulses. Precise locating error: ±0.2m Sampling frequency: 100 MHz, 50 MHz, 25 MHz, 12.5 MHz, 6.25 MHz Maximum working distance: 60KM Test blind zone: 5m
WX-4138T Cable Fault Locator Tester
DC voltage is up to 32kV Each stall of voltages is 16 / 32kV, output can up to 1536 J impact energy Discharge cycle can be adjusted within 3-12 seconds Flash over faults in power cable with a variety of 220V-220KV voltage level It is a one body trolley structure, easy handling at site
WX-A20 Underground Power Cable Fault Locator
Relative humidity: RH≤85%（25℃） Power: AC220V±10%DC12V（7AH） Display mode: 12.1 inch LCD (Windows XP) Signal frequency: 15KHz sine wave Output power: Pomax≥100W
WXGS-V Intelligent Underground Cable and Pipe Detector
Way of working :Peak method, valley method, A-frame method Cable routing :Direct / Coupling / Induction Cable Identification :Direct Connect (power cut) / coupling (has power) Power Supply :Rechargeable Batteries Operating Freq :Low freq, Mid Freq, Hi freq, RF, 50Hz
WXDS-H Underground Power Cable Identification Tester
Signal generator :Power supply: AC220V 50HZ Signal receiver power: 1.5KVA Power regulation mode: intermittent modulation Detection direction and size
WXDS-V Live Cable Identification Instrument
Jaw size :Internal diameter of closure≥125mm Power :1.0KVA (Intermittent instantaneous) Recognition method :Determined according the direction of hand swing Big jaw suitable for kinds of cables
WX-TC Power Cable Fault Locator
The longest testing distance :32km, 100KM for the open-wire line Testing .dead zone :1m Resolution of reading :1m Power dissipation :5VA Electric cable:voltage of 1KV-35KV
WXLC-901D Cable Fault Pre-locator
Sampling frequency: 200MHz Gain range: 0-70dB Low voltage impulse voltage: 32V Max.resolution: 0.4m Dead Zone: 2m Communication interface: USD, Bluetooth etc. (Optional)
TAG-8000 Wireless Digital Non Contact HV Phase Tester
Measurement voltage :10V-500kV (customized) Wireless transmission distance :Stadia distance 150M Display Accuracy :Quantitative measurements≤5° Phase angle resolution :1° Display :LCD
WXCR1800 Wireless High Voltage Electroscope
Measurement voltage :10V-500kV (customized) Wireless transmission distance :Stadia distance 150M Display Accuracy :Quantitative measurements≤5° Phase angle resolution :1° Display :LCD
WXGL-9000B Wireless HV/LV Clamp Meter
Power Supply :DC6V Alkaline Dry Battery (1.5V AAA X 4) Test Method :Clamp CT, Integral Method Display Mode :4 digital LCD display, backlight function, suitable for dark place. Sampling Speed :About 2 times/second Resolution :0.1mA
WXGL-9000 HV/LV Clamp Meter
Power Supply :DC6V Alkaline Dry Battery (1.5V AAA X 4) Test Method :Clamp CT, Integral Method Circuit Voltage :Test for the circuit below 60KV (operated with insulation rod) Overflow Display :Exceed measurement range overflow function: “OL A” symbol display
WXXC-Z Transmission Line Different Frequency Parameters Test
Power supply :3 phase, AC380V±10%, 10A, 50Hz (effective value) Anti interference :Z0: Total zero sequence impedance of a line 1 phase Protection function :Over-current, over-voltage, grounding protection. THD :Sine wave,＜2%. Measurement resolution Capacitance :0.01μF
WXXL-H Transmission Line Parameters Test Set
Longest measured distance :32km (100km for open wire ) Power consumption :5VA Test results auto displayed :by LCD A/D sampling speed is 100MHz, resolution is 1m detection blind area is 1m
WXSF-II Gas Synthesized Tester
Power supply :AC 220V ,Built-in rechargeable battery Battery performance :Charging time : 20 hours ; can work for 10 hours Purity :Accuracy：±0.5% Dew point :Response time（＋20℃） H2S :Stability：0～200ppm
WXWG-V SF6 Gas Leak Detector
Power: 220V 50Hz Measurement range（SF6）:0.1ppm～1000ppm(volume ratio) Indication method :LCD, digital, sound & light alarm Alarm setting range :0.1ppm～1000ppm (volume ratio) Preheating time :2 min Response time :<10S
WXWG-II SF6 Gas Leak Detector Tester
Minimum Detection Amount :1(×10-6volume ratio) Detection Range :1~1000(×10-6volume ratio) Response Time:<1 second Recovery Time:<10 seconds Display Value Error: ≤±3%
WXWS-Z Intelligent Dew Point Meter Analyzer
Dew Point Range :-80℃ — +20℃ Measuring Accuracy :±0.5℃ Moisture Range :0.05— 23100 μL/L Communication method :USB,Equipped with host computer data management software Measuring time :3-5 Minutes
WXWS-V Sf6 Dew Point Meter
Measurement range（SF6）:0.1ppm～1000ppm(volume ratio) Indication method :LCD, digital, sound & light alarm Alarm setting range :0.1ppm～1000ppm (volume ratio) Preheating time :2 min Response time :<10S
WXWS-W Sf6 Dew Point Meter
Measurement range（SF6）:0.1ppm～23700ppm Dew Point Precision: ±2℃ Repeatability: ±0.2℃ Gas flow: SF6 adjusted at 0.7~0.9L/min Output port: standard USB
WXFJ-II SF6 Gas Decomposition Tester
Power supply :AC 220V, Built-in rechargeable battery H2S Measuring range：0～100ppm SO2 Accuracy：±0.5% CO The minimum detectable value：≤1ppm Battery performance :Charging time : 20 hours ; can work for 10 hours
WXP-II Sf6 Portable Gas Purity Analyzer
Power supply :AC 220V ,Built-in rechargeable battery Battery performance :Charging time more than 20 hours , can use 10 hours Measuring Range :0%~100% Accuracy :±0.5% Measuring time :<2min.
WXWG-IV SF6 Gas Leak Detector
Power: 220V 50Hz Measurement range（SF6）:0.1ppm～1000ppm(volume ratio) Indication method :LCD, digital, sound & light alarm Alarm setting range :0.1ppm～1000ppm (volume ratio) Preheating time :2 min Response time :<10S
WXJD-II SF6 Density Relay Calibration Tester
Working voltage :AC220V, 50Hz Power :50W Pressure measurement resolution :0.001MPa Accuracy :0.2 Pressure measurement range :0～1MPa Storage Capacity :Save 50 test results at the same time
XP-1A Handheld Sf6 Gas Leak Detector
Power supply :DC 3V, two alkaline batteries Maximum sensitivity :R12, R22, R134a are approved by (14 g / year) Usage time of probe :About 20 hours Usage time of battery :About 30 hours under normal use Working method :Continuous, unlimited
WX2520 Pointer Insulation Resistance Tester
Output Voltage: DC 500V~2500V Accuracy output voltage: 4MΩ~ 100MΩ, 0~+10% HV short-circuit current: ≥1mA Power supply: 8 AA batteries AC/DC dual-use Automatic conversion range, dual-scale display
WX2550 Pointer Insulation Resistance Tester
Output Voltage: DC2500V DC5000V Accuracy output voltage: 20 MΩ~ 100MΩ, 0~+10% 40 MΩ~ 200MΩ, 0~+10% HV short-circuit current: ≥1mA Power supply: 8 AA batteries Automatic conversion range, dual-scale display, LED display
WX2010 Intelligent Dual Display Insulation Resistance Tester
Output Voltage: DC 500V, 1000V, 2500V, 5000V Accuracy output voltage: 4 MΩ~ 20MΩ, 0~+10% 8 MΩ~ 40MΩ, 0~+10% 20 MΩ~ 100MΩ, 0~+10% 40 MΩ~ 200MΩ, 0~+10% HV short-circuit current: ≥3mA Power supply: 8 AA batteries
WX3600 Pointer Insulation Resistance Tester
Output Voltage: DC 2500V, 5000V, 10000V Accuracy insulation resistance: 5M~100G ±5% 10M~200G ±5% 20M~400G ±5% HV short-circuit current: ≥1mA Power supply: 8 AA batteries
WXKV-S10KV Digital Insulation resistance tester
Function: Insulation resistance test, voltage test Base conditions: 23°C±5 °C, below 75%rh Rated voltage(V): 250V; 500V; 1000V; 2500V; 5KV; 10KV Test voltage: rated voltage× (1 ±10% ) Insulation Resistance Range: 0.01MΩ~1000G Ω
WXKV-10KV Digital Insulation Resistance Meter
Rated Testing Voltage: 50V, 100V, 250V, 500V, 1KV, 20～19999uL/L.5KV, 5KV, 10KV Upper Limit of Measuring Range: 100GΩ ~ 10TΩ Lower Limit of Measuring Range: 0.1MΩ Power supply: 14.8V lithium battery Voltage resistance: AC10.0kV 50Hz 1min Insulation resistance: > 500 MΩ (between the test line and machine case)
WX2670-II Insulation Resistance Tester
DC :8×1.5V(AA，R6) battery AC :220V/50Hz Power dissipation :quiescent power dissipation≤160mW; Maximum power≤2.5W Short-circuit current :＞1.6mA Output voltage grades :100V，250V，500V，1000V
WX2671-II Digit Insulation Resistance Megohmmeter
DC :8×1.5V (AA, R6) battery AC ：220V/50Hz Power dissipation :quiescent power dissipation≤160mW; Maximum power≤2.5W Voltage/Load :2500V/20MΩ Resolution :0.01MΩ，0.1MΩ，1.0MΩ，10.0MΩ Output voltage grades :500V，1000V，2000V，2500V
WX2672-II Digit HV Insulation Resistance Tester Megohmmeter
DC :8×1.5V (AA, R6) battery AC :220V/50Hz Power dissipation :quiescent power dissipation≤160mW; Maximum power≤2.5W Voltage/Load :2500V/20MΩ Resolution :0.01MΩ，0.1MΩ，1.0MΩ，10.0MΩ Output voltage grades :500V，1000V，2500V，5000V
WX3127 High Voltage Insulation Resistance Tester
Power supply: Rechargeable lithium battery 5.2Ah Rated voltage: 250V, 500V, 1kV, 2.5kV, 5kV Output voltage accuracy: (5%-10%) ±10V Measuring range: 0.50MΩ~2.00TΩ Short circuit current:>5mA Filter test mode: 10S, 20S, 30S, 40S for choice
WX3128 Insulation Resistance Tester
Power Supply: Rechargeable lithium battery 6.2Ah Rated Voltage: 250V, 500V, 1KV, 2.5KV, 5KV, 10KV, 15KV Output Voltage Accuracy: (5%～10%) ±10V Output Short Circuit Current: ≥7mA Voltage Test Range: AC/DC Voltage Test Accuracy: ±10%rdg±10nF
GM-20KV HV Digital Megohmmeter
Test voltage: 0.25KV-20KV Resistance measurement range: 0.5~1999G Ω Calibration voltage of GΩ range is 2.5kV Calibration voltage of MΩ range is 0.5kV Relative humidity ： 20 ～ 90%
GM-15KV HV Digital Megohmmeter
Test voltage: 0.25KV-20KV Resistance measurement range: 0.5~1999G Ω Calibration voltage of GΩ range is 2.5kV Calibration voltage of MΩ range is 0.5kV Relative humidity ： 20 ～ 90%
GM-10KV HV Digital Megohmmeter
Test voltage: 0.25KV-20KV Resistance measurement range: 0.5~1999G Ω Calibration voltage of GΩ range is 2.5kV Calibration voltage of MΩ range is 0.5kV Relative humidity ： 20 ～ 90%
GM-5KV Adjustable Insulation Resistance Meter
Test voltage: 0.25KV-20KV Resistance measurement range: 0.5~1999G Ω Calibration voltage of GΩ range is 2.5kV Calibration voltage of MΩ range is 0.5kV Relative humidity ： 20 ～ 90%
WXPQ-300C Portable Power Quality Analyzer
Number of Channels: 4U/4I Phase-to phase voltage: 1.0V~2000V. Phase-to-neutral voltage: 1.0V~1000V. Number of Transient: 150 sets. Frequency: 40Hz~70Hz.
WXPQ-300G Three Phase on Site Energy Meter Calibrator
100A, 500A and 1000A clamp meters are optional Working power supply is AC57 ~ 450V Store 10000 groups of energy meters U disk storage is supported High resolution TFT color LCD screen display
WXPQ-300S Six-Phase Electrical Power Quality Tester
Secondary phase voltage range: 5-500V Secondary current range: 5mA-10A Primary current range: 100mA-5A Simultaneous measure 1-3 circuit AC current Measurement voltage range: 1~500V
WXPQ-300A Portable Three Phase Electrical Tester
Voltage fluctuation: 0.1%~10.0% Active Power: 0.05~700KW Apparent Power: 0.05~700KVA 3 Phase Voltage: 10~700V 3 Phase Current: 0.5~1000A
SMG6000 Three Phase Electrical Power Quality Meter
Phase voltage range: 5-500V phase current range:5mA-10A Simultaneous measure 1-3 circuit AC voltage Simultaneous measure 1-4 circuit AC current 12 hours continuous use Measurement voltage range: 1~500V
SMG3000 Electrical Handled Digital Three Phase Power Quality Meter
3.5 inch TFT color display Measuring Voltage Range: 1~500V Measuring Current Range: 0.001~10A Frequency: 45~65Hz Reactive Power: 0.001~5000VAR
SMG2000B Power Quality Analyzer Double Clamp Digital Phase Meter
Secondary windings can stand 1000V/50Hz ≥10MΩ between the two voltage input terminals Two voltage input terminals can stand Sinusoidal AC Voltage 500V/50Hz for 1min Device with high-contrast LCD screen Wave forms of measured signal: sine wave, β=0.02
SMG2000E Double Clamp Digital Phase Meter Power Quality Tester
Current resolution up to 0.1mA Voltage resolution up to 0.1V Device with high-contrast LCD screen Wave forms of measured signal: sine wave, β=0.02 Measuring Amplitude range: 100~220V, 0.5~1.5A
WX4700 Three Phase Digital Phase Volt-Ampere Meter
Communication Interface: USB Measure time: 2s/time Date Storage: 1500 sets Clamp: Φ8mm Current: AC 0.0mA~20.0A Voltage: AC 0.00V~600V
WX4300 Intelligent Double Clamp Digital Phase Volt-Ampere Meter
Communication Interface: USB Measure time: 2s/time Date Storage: 1500 sets Clamp: Φ8mm Current: AC 0.0mA~20.0A Voltage: AC 0.00V~600V
WX4200A Intelligent Double Clamp Digital Phase Volt-Ampere Meter
Communication Interface: USB Measure time: 2s/time Date Storage: 1500 sets Clamp: Φ8mm Current: AC 0.0mA~20.0A Voltage: AC 0.00V~600V
WX4000A Intelligent Double Clamp Digital Phase Volt-Ampere Meter
Communication Interface: USB Measure time: 2s/time Date Storage: 1500 sets Clamp: Φ8mm LCD: 240dotsX160dots Current clamp length: 2m
WXYX-III Portable Electrical Phase Shifter
Input voltage: Three-phase four-wire 3×380(220)V 50Hz Output Voltage: Three-phase four-wire 3x(0~380)/(0~220) Maximum output capacity: 3x300VA Insulation resistance: ≥22MΩ Pressure test: 1.0kV/min
WX5800 Double Clamp Multifunctional Earth Tester
Power Supply :DC 9V(Zn-Mn dry battery R14S 1.5V 6 PCS, continuous standby for 300 hours ) Test Voltage Wave :Sine wave Test Frequency :128Hz/111Hz/105Hz/94Hz(AFC) Short-circuit Test Current :AC 20mA max Open-circuit Test Current :AC 40V max
WX3000B Earth Resistance Soil Resistivity Tester
Power Supply :DC 9V Zi-Mn dry battery LR14 1.5V 6 PCS LCD :124mm×67mm(black light) Accuracy :±2%rdg±3dgt Date Storage :300 sets Cable resistance verification :Automatic calibration
WX3000 Digital Earth Resistance Tester
Range：Ground Resistance：0.01Ω-2000Ω；Ground voltage：AC 0～600V 1：Ground resistance test 2：Ground Voltage test 3：Low resistance test Power Supply :DC 9V(Zi-Mn dry battery R14S 1.5V 6 PCS, continuous standby for 300 hours )
WXJD-10A Ground Continuity Resistance Tester
Power supply :AC220V±10%、50Hz Work Mode :Continuous Display :Three and half LCD display Measuring Radius :50 m Measurement Range :1～1999mΩ
WXCZ-II Grounding Lines Group Resistance Tester
Power supply :220V±10% 50±5 Hz The test terminal of ground wire :2~5 terminal Accuracy :Class 0.5 the measuring range :0～199.99mΩ Test current :20A，30A
WX2571-II Earth Digital Insulation Resistance Tester
Power supply and power dissipation DC: 8×1.5V(AA，R6) battery AC: 220V/50Hz Ground voltage (frequency virtual value) :≤ 5V error ≤ ± 5% Maximum power dissipation :≤2W Resolution :0.001Ω、0.01Ω、0.1Ω、0.01V
WX5600 Clamp Earth Loop Resistance Tester
Power supply :8 AA NiMH rechargeable batteries or regular AA batteries Storage capacity :200 groups Jaw size :Φ50mm Minimum resolution :0.01Ω Double clamp method :0.01Ω～200Ω
WXF3000 DC System Earth Fault Detector
Supply voltage :AC220V±10% Voltage frequency :50Hz±5% Input fuse :200mA Maximum power :3W Signal current measurement sensitivity :0.5mA
WXCR2000 Earth Clamp Meter
Power Source :6VDC (4 ×5# alkaline battery) LCD display :4-digital LCD：47×28.5mm2 Protection Level :Double insulation Structural Feature :In the jaw way Shift :Automatic
WXWR-3A Ground Network Earth Resistance Tester
Power supply :AC 220V±10%，50Hz Anti-jamming capability :Anti- frequency 50Hz voltage 10V Current output gear :3/2.5/2/1.5/1A Impedance measurement range :0～200Ω Resolution :0.001Ω
WXWR-5A Ground Network Earth Resistance Tester
Power supply :AC220V±10%，50Hz Anti-jamming capability :Anti- frequency 50Hz voltage 10V Current output gear :5 / 4.5 / 4 / 3.5 / 3 / 2.5 / 2 / 1.5 / 1A, 0.5A/gear, total 9 gears Resolution :0.001Ω Impedance measurement range :0～200Ω (Including current pile impedance)
WXYZ-302 Zinc-Oxide Arrester Leakage Current Tester
Power: DC or AC 220V, 50Hz. Reference voltage input range: 50Hz 、 30 ～ 100 800x480 Color LCD graphic displays Leakage current 100μA ～ 10mA(peak value) Measurement voltage range 30 ～ 100V
WXYZ-208 Zinc Oxide Arrester Characteristics Tester
Power consumption: 4W AC power supply: AC220V ±10%，50Hz ±1% Reference voltage input range (peak value): 10V～200V Angle measurement range: 0°～90°
FCZ-IV Arrester Discharge Counter Detector Tester
Small in volume, light in weight Output impulse current waveform: 8/20μs Current amplitude: >100A Applies to test if the discharge counter normally work
FCZ-V Arrester Discharge Counter Detector
Small in volume, light in weight Output impulse current waveform: 8/20μs Current amplitude: >100A Applies to test if the discharge counter normally work
WXFC-2G Lightening Protection Element Components Tester
DC breakdown voltage (V sdc): (20~1700)V Insulating resistance: 6M Ω(500V) Voltage withstand: AC 1.5kV 50HZ 1min Power supply: DC 12V dedicated power supply Leakage current (I 0.75U 1mA): (0.1~199.9) μA
WXFC-2GB Lightening Protection Components Tester
DC breakdown voltage (V sdc): (20~1700)V Insulating resistance: 6M Ω(500V) Voltage withstand: AC 1.5kV 50HZ 1min Power supply: DC 12V dedicated power supply Leakage current (I 0.75U 1mA): (0.1~199.9) μA
WXYM-Z Conductance Insulator Intelligent Salt Density Tester
Salt density measuring range: 0.001~9.999mg/cm2 Salt density measuring accuracy: ≤±1% Temperature measuring range: 0~100 ℃ 320x240 color TFT LCD screen display Power supply: AC: 220V ±10% ; DC: 6,number 5, 1.5V dry batteries
WXHM-Z Insulator Soluble Deposit Density Tester
Power supply: AC220V ±10%, 50Hz Power: 180W Humidity: ≤ 80% LCD Display
WXJC-W Wireless Insulator Voltage Distribution Detector
Measuring voltage range: 0 ～ 40kV Measurement error: ≤±1% Resolution: 0.01kV Sampling rate: 10 times /seconds Working current: ≤120mA （ handset ）， ≤40mA （ detector ）
WXBT-911 Battery Tester
Wide test range: 5~6000Ah Compatible for single cell of 2V, 6V and 12V Resistance range: 0.00mΩ ~ 100mΩ Voltage range: 0 V ~220V Measuring data memory: 3000 cells Working time: 5-6 hours
WXBT-916 Battery Internal Resistance Tester
Power source :12V, chargeable Li-battery Consumption :8 hours standby mode Min. resolution :Internal resistance: 0.001mΩ Voltage: 1mV Storage volume :64Mbit Flash + 8G SD card LCD :5”colour touch screen
WXBO Series Battery Packs Online Discharge Charge Load Tester
Single voltage range: 1-20V, to meet the 2V, 6V, 12V monomer monitoring Display all test data: current, voltage, discharge time, capacity, etc Item No : WXBO-4815 /WXBO-4830/ WXBO-2206/ WXBO-6006 /WXBO-60010
WXCE-4815 Mini Battery Discharge Capacity Load Tester
Group Voltage Range :20~60V Discharge Current :0~150A Internal Memory :8Mbit FLASH PC Communication :RS232 socket Accuracy discharge current: ≤±0.5% / group voltage: ≤±0.5% / battery voltage: ≤±0.5%
WXCE Series Battery Discharge Capacity Tester
Power Supply Voltage :single-phase3-wire 220Vac (-20%～+30%), frequency: 45～65Hz AC Input :standardsocket, available for 1～1.5 mm2 cable Altitude :Available below 4000m Internal Memory :8 Mbit FLASH
WXCE-8XO Power Battery Discharge Capacity Tester
Type: WXCE820/WXCE840/WXCE860 Max Extension Current :720A Max(120A internal + 600A external) Discharge Mode :Constant Current/Power/Resistance Accuracy :Current: ≤±0.5%, Group Volt: ≤±0.5%, Cell Volt: ≤±0.5% PC Communication :RS232 serial communication
WXKH-2612 Intelligent Battery Activator Discharge Tester
Discharger & Charger for 1.2V/2V/6V/12V single battery Display: 5.7 inch LCD touch screen Support RS232 PC Software Support up to 9cycles discharge/charge autorun
WX-500L Automatic Capacitance Bridge Tester
Display: 7 inch color touch screen LCD Power Supply: AC 220V ±10%, 50Hz Output Voltage: AC 23V ±10%, 50Hz Maximum Output Current: 20A Resolution: 0.001uF
WX-500S Automatic Capacitance Inductance Tester
Power supply：AC 220V±10%，50Hz Output voltage (open circuit)：AC 23V±10%，50Hz（capacitance）； AC 3V±20%，50Hz (inductance） Maximum output current：20A Output short circuit protection: Automatic Inductance measurement range：100μH～50H
WXZGS Generator DC Hipot Test Set
Power:AC220V±10% 50HZ Output voltage accuracy :±(1.0%R±2D) Output current accuracy : ±(1.0%R±2D) Ripple factor :≤0.5% Working mode :Intermittent use, 30 minutes under rated load
WXZG-60kV/5mA DC HV Hipot Tester
Power :AC220V±10%,50Hz±1% Output voltage indication accuracy :<1 class 0.75 times output voltage indication accuracy :<1 class,With latch Altitude :1500m below Way of working :Intermittent use for 30 minutes
WXTF Variable Frequency Cable Resonant Test Set
Power supply:Single phase :220V Or three phase :380V±10%, Frequency:50Hz±5% AC effective value Rated output voltage：≤0~220kV Output frequency ：30~300Hz Frequency adjustment ：0.1Hz
WXRS AC Resonant Test System For Substation
Frequency Power Source: 3kv~60kv Divider: 50kv~800kv Rated Output Voltage:0~1000kv Power Supply: single phase220V / 3 phase 380V
WXZG High Voltage DC Generator
Power:AC220V±10%, 50Hz±1% Ripple factor : ≤0.5% 0.75 times output voltage indication accuracy : <1，with latch function Working mode :discontinuously work for 30 minutes Altitude :<1500m
WX9320 AC DC Withstanding Voltage Tester / Insulation Resistance Tester
Withstanding Voltage Test Output Voltage: AC: 0.05~5.00KV DC: 0.05~6.00KV Current Test Range: AC: 0.00~10.00mA DC: 0.00~5.00mA
WX9320-S8A AC DC Hipot Tester / Insulation Resistance Tester
Withstanding Voltage Test Output Voltage: AC: 0.05~5.00KV DC: 0.05~6.00KV Current Test Range: AC: 0.00~10.00mA DC: 0.00~5.00mA
WX2672CM Portable AC/DC Dual Use Hipot Tester
Power Requirements: AC:220V±10% 50Hz/60Hz ± 3Hz Test Accuracy: ± (5%+3 words) Test Time: (0.0~999)s 0.0=continuous test Transformer Capacity: 100VA, 500VA, 1000VA. Interface of PLC: Optional
Sitemap
Home
About us
Products
News
Contact us
FOLLOW US
