AC Resonant System

Home > Products >  AC Resonant Test System >  AC Resonant System

AC Resonant Test System (For Substation Equipment)

  • Transformer, GIS, SF6 switch, CT/PT, insulator, bus bar, cable, bushing, and others capacitive devices are the common primary electric equipment.

Share
Inquire Now
PRODUCT DESCRIPTION

AC Resonant Test System (For Substation Equipment)

Introduction

Transformer, GIS, SF6 switch, CT/PT, insulator, bus bar, cable, bushing, and others capacitive devices are the common primary electric equipment. Composed by power control cabinet, excitation transformer, reactor, voltage divider, connects silicon rectifier stack and micro ammeter with the voltage divider, then can finish the DC voltage withstand test.

Features

1.It with smaller volume, lighter weight compared with others reactors which in same voltage class and capacity. With small temperature rise under rated load; strong mechanical strength, good insulation performance, reliable.
2.The capacity of the power control cabinet is high; strong protection function; good output waveform; good stability; multi-function, easy to operate; single phase 220V or three phase 380V are available.
3.Can match different kinds reactors, multifunctional, highly cost effective.

Parameters

Rated output voltage

0~1000kV

Output frequency

30~300Hz

Voltage waveform

Sine wave,distoration≤1.0%

Working form

Full power continuous working time 60min

Quality factor

30~90

Frequency adjustment sensitivity

0.1Hz

Instability

<0.05%

Power supply

Single phase 220V or three phase380V±10%

Frequency: 50Hz±5%

Serial product and application:

Model

Application(10kV~500kV transformer substation AC voltage withstand equipment, frequency: 30~300Hz )

Frequency power source

Resonant reactor

Excitation transformer

Divider

Application

WXTF-50/50/25

3kW

25kV/1A:2 sets
( dry type )

3kVA
( dry type )

50kV

10kV transformer ≤1000kVA
10kVswitch, bus bar, PT,CT, etc.
10kV(300mm2)cable≤1.0km

WXTF-108/108/27

5kW

27kV/1A:4 sets
( dry type )

5kVA
( dry type )

110kV

35kV transformer ≤31500kVA

35kV switch, bus bar, PT,CT, etc.
10kV(300mm2)cable: 2km
35kV (300mm2)cable: 0.5km

WXTF-200/200/50

10kW

50kV/1A:4 sets
( dry type )

10kVA
( dry type )

200kV

110kVtransformer≤ 50000kVA
110kVGIS,PT,CT, etc.(preventive trial)
35kV(300mm2)cable≤1.0km
10kV (300mm2)cable≤2.0km

WXTF-270/270/45

15kW

45kV/1A:6 sets
( dry type )

15kVA
( dry type )

300kV

110kVtransformer≤ 50000kVA
110kVGIS,PT,CT, etc.
35kV(300mm2)cable≤1.2km
10kV (300mm2)cable≤3.0km

WXTF-800/400/50

30kW

50kV/2A:8 sets
( dry type )
100kV/2A:4 sets
(oil immersed)

30kVA
( dry type )
30kA

(oil immersed)

400kV

220kV transformer ≤80000kVA

110kVtransformer≤ 50000kVA
110kV/220kVGIS,PT,CT, etc.
35kV(300mm2)cable≤2.0km
110kV (300mm2)cable≤0.7km

WXTF-1600/800/200

60kW

200kV/2A:4 sets
(oil immersed)

60kVA
( dry type )

800kV

220kV transformer ≤80000kVA

110kVtransformer≤ 50000kVA
500kVGIS,PT,CT, etc.
220kVswitch,GIS,PT,CT, etc.
110kV(400mm2) cable≤1.5km
220kV (400mm2) cable≤1.0km

Note: can make the solution according the parameters of the measured equipment

FAQ:

1.When can I get the price?

We usually quote within 6hours after we get your inquiry. If you are vey urgent to get price, please call us or tell us in your email so that we will regard your inquiry priority.

2. What about the leading time for production?

Honestly, it depends on the order quantity and the product. Usually our leading time is within 7 working days after order confirmed.

3. What is your payment terms?

We accept EXW,FOB, CFR, CIF, ect. You can choose the one which is the most convenient and cost effective for you.

4. How much will be the Shipping cost and time?

This will depend on the size of your goods and the method of shipping (by sea/ by air/by Express) and your designated port or airport. We will be grateful if you can spare us some minutes to evaluate the cost based on the information provided.

5. Could you please tell me the Warranty Period of your product?

Our warranty period is one year free and lifelong maintenance. If the product is damaged (if not man-made damage), in the first year,we will send free parts for replacement. Over warranty, maintenance is paid service.

6. What kind of Certificate can you provide?

We can provide the CE mark, ISO 9001 quality certificate, third party calibration certificate(CNAS) and factory test report.

7. Do you have Technical Backup to all customers from different countries?

To be sure,our technical support is always available and quick response.
We are manufacturer with much on-site testing experience, thus we know how to deal with your problems. Moreover, our engineers can go to your country to support if need.

 

contact US

  • Add : No. 335, B Dist., No. 4 Factroy, Optic Valley Industrial Area, Liufangyuan South Road No. 9, 
            Donghu High Tech Dvpt. Zone, Wuhan, Hubei, China

  • Email: sales02@wghipot.com

  • Skype:+86 13618663321

  • Wechat: WG-Hipot

  • WhatsApp:+86 13618663321

  • Tel : +86-27-87888781

  • Fax: +86-27-87888782

NAVIGATION

Copyright © Wuhan WG Hipot Electric Tester Co., Ltd.